Useful Commands

Rsync

rsync -vaopHDS --stats --ignore-existing -P (Source) (Destination) 

-v, --verbose
-a, --archive (It is a quick way of saying you want recursion and want to preserve almost everything.)
-o, --owner
-H, --hard-links
-D, --devices (This option causes rsync to transfer character and block device information to the remote system to recreate these devices.)
-S, --sparse (Try to handle sparse files efficiently so they take up less space on the destination.)
-P (The -P option is equivalent to --partial --progress.)

Fixing perms for a website

find /home/USERNAME/public_html/ -type f -exec chmod 644 {} \; && find /home/USERNAMER/public_html/ -type d -exec chmod 755 {} \;

DDrescue

ddrescue -f -n -r3 /dev/[bad/old_drive] /dev/[good/new_drive] /root/recovery.log

-f   Force ddrescue to run even if the destination file already exists (this is required when writing to a disk). It will overwrite.

-n   Short for’–no-scrape’. This option prevents ddrescue from running through the scraping phase, essentially preventing the utility from spending too much time attempting to recreate heavily damaged areas of a file.

-r3   Tells ddrescue to keep retrying damaged areas until 3 passes have been completed. If you set ‘r=-1’, the utility will make infinite attempts. However, this can be destructive, and ddrescue will rarely restore anything new after three complete passes.

SSH tunneling

-L = local, the 666 will be the port that will be opened on the localhost and the 8080 is the port listening on the remote host (192.168.1.100 example). -N = do nothing

ssh root@my-server.com -L 666:192.168.1.100:8080

AutoSSH

Autossh is a tool that sets up a tunnel and then checks on it every 10 seconds. If the tunnel stopped working autossh will simply restart it again. So instead of running the command above you could run

autossh -NL 8080:127.0.0.1:80 root@192.168.1.100

Force reinstall all arch packages

pacman -Qqen > pkglist.txt
pacman --force -S $(< pkglist.txt)

Check Mobo info

dmidecode --string baseboard-product-name

More Details:

 dmidecode | grep -A4 'Base Board'

Temp FTP WebServer

python -m SimpleHTTPServer 8000

Find what is taking all the space

du -Sh / | sort -rh | head -5

find /* -type f -exec du -Sh {} + | sort -rh | head -n 5

Put a +2TB drive in GPT

Start parted on the drive you want in gpt

parted /dev/sdd
mklabel gpt 
unit TB
mkpart primary 0.00TB 16.00TB
print parted /dev/sdd
mklabel gpt 
unit TB
mkpart primary 0.00TB 16.00TB
print