Adding Adapter on vSwitch (+ Notes on adding a Adapter for a SAN)

List Adapter

Get-VMNetworkAdapterVlan -ManagementOS 

Adding Adapter

Add-VMNetworkAdapter -ManagementOS -Name "Lan" -SwitchName "vSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Wan" -SwitchName "vSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "San" -SwitchName "vSwitch"

Tagging vlan on Adapter

 Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "LAN" -Access -VlanId 3023
 Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Wan" -Access -VlanId 2295
 Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "San" -Access -VlanId 2230

On all interfaces (Physical or Virtual) we will activate the Jumbo Packets (also called Jumbo Frames) for 9014 Bytes and on the Physical NICs make sure to uncheck "Allow the computer to turn off this device to save power"

On the "vSwitch" interface uncheck all the option

On all interfaces that will be configured with an IP, uncheck IPv6

For the SAN interface configuration  uncheck all options except IPv4 and uncheck "Register this connection's addresses in DNS" and select "Disable NetBIOS over TCP/IP"

    2