Adding Adapter on vSwitch (+San Notes)

List Adapter

Get-VMNetworkAdapterVlan -ManagementOS 

Adding Adapter

Add-VMNetworkAdapter -ManagementOS -Name "Lan" -SwitchName "vSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Wan" -SwitchName "vSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "San" -SwitchName "vSwitch"

Tagging vlan on Adapter

Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "LAN" -Access -VlanId 3023
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "Wan" -Access -VlanId 2295
Set-VMNetworkAdapterVlan -ManagementOS -VMNetworkAdapterName "San" -Access -VlanId 2230

If you need to remove an Adapter

Remove-VMNetworkAdapter -ManagementOs -VMNetworkAdapterName LAN

On all interfaces (Physical or Virtual) we will activate the Jumbo Packets (also called Jumbo Frames) for 9014 Bytes and on the Physical NICs make sure to uncheck "Allow the computer to turn off this device to save power"

On the "vSwitch" interface uncheck all the option

On all interfaces that will be configured with an IP, uncheck IPv6

For the SAN interface configuration  uncheck all options except IPv4 and uncheck "Register this connection's addresses in DNS" and select "Disable NetBIOS over TCP/IP"

    2